Programmable Power Products Elgar, Sorensen and California Instruments Products Products | Support | Contact | News Sales Worldwide

Argantix XDS Series : Specifications KDC Series - Models¹ Model Output Voltage Current RMS Noise XDS 30-167 0-30 0-167 15mv XDS 30-333 0-30 0-333 15mv XDS 30-500 0-30 0-500 15mv XDS 40-125 0-40 0-125 15mv XDS 40-250 0-40 0-250 15mv XDS 40-375 0-40 0-375 15mv XDS 50-100 0-50 0-100 15mv XDS 50-200 0-50 0-200 15mv XDS 50-300 0-50 0-300 15mv XDS 80-62 0-80 0-62 25mv XDS 80-125 0-80 0-125 25mv XDS 80-187 0-80 0-187 25mv XDS 100-50 0-100 0-50 25mv XDS 100-100 0-100 0-100 25mv XDS 100-150 0-100 0-150 25mv XDS 150-33 0-150 0-33 25mv XDS 150-66 0-150 0-66 25mv XDS 150-100 0-150 0-100 25mv XDS 300-17 0-300 0-17 100mv XDS 300-33 0-300 0-33 100mv XDS 300-50 0-300 0-50 100mv XDS 400-12 0-400 0-12.5 100mv XDS 400-25 0-400 0-25 100mv XDS 400-37 0-400 0-37 100mv XDS 600-8 0-600 0-8 250mv XDS 600-17 0-600 0-17 250mv XDS 600-25 0-600 0-25 250mv Note 1: Contact factory for availability of models with output voltage ranges not listed here.   Product Configurator   AC Electronic Loads AC Modular Supply Discontinued Products Product Support Contact Sales Output Power Maximum 5, 10 or 15 KW Voltage Accuracy: 0.3 % FS Resolution: 0.033 % FS Line Regulation: < 0.1% of V range Load Regulation: < 0.1% of V range Transient Response: Voltage will recover to within 2% of V range within 2 msec for 30 % load step. Stability: ± 0.05% of max. rating per 8 hours after 30 mins. warmup period. Current Accuracy: 0.5% FS at 0-100% of range Resolution: 0.1%-0.033 % (model specific) Line Regulation: < 0.1% of I range Load Regulation: < 0.1% of I range Stability: ± 0.05% of max. rating per 8 hours after 30 mins. warmup period. Input Voltage: 208 - 10 % to 230 + 10% VAC 400 ± 10 % VAC (option -400) 480 ± 10 % VAC (option -480) All inputs are L-L, 3 phase, 3- wire plus safety ground. Power Level Vlow 5 kW 10 kW 15 kW 187 V 27 A 54 A 81 A 360 V 15 A 30 A 45 A 432 V 12 A 24 A 36 A Current RMS: Typical RMS current per phase at low line input voltage. Power Factor: > 0.65 Efficiency: > 85 % at full load. Measurements Voltage Model Resolution Accuracy XDS 30-XXX 0.01 V 0.05 V XDS 40-XXX 0.01 V 0.05 V XDS 50-XXX 0.02 V 0.1 V XDS 80-XXX 0.02 V 0.1 V XDS 100-XXX 0.1 V 0.2 V XDS 150-XXX 0.1 V 0.3 V XDS 300-XXX 0.1 V 0.5 V XDS 400-XXX 0.1 V 0.5 V XDS 600-XXX 0.2 V 1.0 V Voltage Current Range Resolution Accuracy 0 - 8.3 A 0.003 A 0.013 A 0 - 16 A 0.005 A 0.025 A 0 - 33 A 0.01 A 0.05 A 0 - 66 A 0.02 A 0.1 A 0 - 187 A 0.1 A 0.3 A 0 - 400 A 0.1 A 0.5 A 0 - 600 A 0.2 A 1 A Power Range Resolution Accuracy 0 - 5 KW 1 W 0.3 % FS 0 - 10 KW 2 W 0.3 % FS 0 - 15 KW 5 W 0.3 % FS Peak Current Resolution: See current table Accuracy: Same as current + 3 x resolution. Protection Over temperature, short circuit, over current protection Controls Voltage setting: Digitally encoded rotary knob Current setting: Digitally encoded rotary knob Measurement select: Push button Output on/off: Push button Power on/off: Toggle switch Indicators Display: Dual 7 segment large LED LED’s for: Output on/off, cc mode, cv mode, remote, measurements. Remote Control Remote Control A standard RS232C and analog RPV (0-10 VDC) are included with all XDS Series DC Power Supplies. An optional GPIB/IEEE-488 input is available as well. RS-232C / RS-485 - Standard 9 pin D-shell connector, 115200 baud max., SCPI syntax. RPV Input - Standard Input: 0-10 VDC for 0-100% range Connector: 15 pin D-sub. Remote Inhibit - Standard Programmable for default high or low -IF Option IEEE-488 Interface IEEE-488 (GPIB) talker listener. Subset: AH1, L3, RL2, SH1, T8 IEEE-488.2 SCPI syntax Environmental Temperature Coefficient Voltage set point: 0.02%/°C of V Range Current set point: 0.03%/°C of I Range Ambient Temperature Operating: 0° to 40° C / 32° to 104° F Storage: -40° to 75° C / -40° to 167° F Humidity Operating 0 to 80% RH, non condensing Cooling Forced air, side and top intake, rear exhaust. Mechanical Dimensions Height: 5.25” / 133.35 mm Width: 19” / 482.6 mm Depth: 22.19” / 563.3 mm excl. bus bars and cover 24.74” / 628.4 mm incl. bus bars and cover Weight Model 15 kW 10 kW 5 kW Net 90 lbs. 70 lbs. 50 lbs. 41 Kg 32 Kg 23 Kg Shipping (approx.) 125 lbs. 105 lbs. 85 lbs. 57 Kg 48 Kg 39 Kg Rack Mounting Unit must be supported by shelf or brackets when mounted in 19” cabinet. No provisions for rack slides are made on instrument.

Copyright © 2009 AMETEK Inc. Privacy Phone: 858-450-0085