| DC High Power Modules General Specifications |
|
| Line Regulation |
+\- 10% line change |
Steady State,
Voltage Mode |
0.01% of
full-scale + 10mV (330W) and
0.03% of
full-scale (1kW) |
Steady State,
Current Mode |
0.05% of fullscale
(330W)
and 0.1% of full-scale (1kW) |
| Transient, Voltage Mode |
Less than 1% of full-scale excursion
returning to steady state within 500 micro-sec |
| Transient, Current Mode |
Less than 0.05% of full-scale (330W)
and less
than 0.1% (1kW) |
| Remote Sense |
Up to 3V load line drop. The drop in the load leads subtracts from the maximum voltage available for the load. |
| Parallel |
Up to six like modules |
| Series |
Up to five like modules for 16V, 65V;
up to three like models for 33V, 50V, 120V
Float not to exceed 200V (16V, 33V, 50V 120V), 300V (65V), 450V (450V). |
| Sag/Surge/Hold Up |
Sag to 65% of nominal for 450ms at full output power with AC input at ≥200VAC. Surge to 135% of nominal for 450ms at full output with AC input ≤230VAC. 10ms hold up at loss of input. |
| Remote programming connector |
9-pin D-sub |
| Output connector |
Combination signal/power contact subminiature D (Mating connector kit available) |
| Physical |
330W: 4.2 lbs (1.91 Kilograms)
1000W: 8.7 lbs (3.95 Kilograms) |
Regulatory
|
Certified to UL 61010-1, CSA C22.2 No.
61010.1 and IEC/EN 61010-1.
Compliance with EN61326 and FCC 21 CFR,
Subpart J
CE Mark is to EMC and LVD
All specifications: 25°±5°C. |
|
 |
|
|
|
|
|
|
|
|
